The following "SET" parameters are used to help troubleshoot NetWare v4.10 SFTIII
                             servers. Theses parameters must be set in the IOSTART.NCF file and must only be used for
                             Troubleshooting purposes. These parameters will halt both (primary & secondary) on any
                             type of error. All SET parameters but two can be called from a NCF file. SET Comprehensive
                             MSEngine Synchronization Check = on , & SET Primary Server Wait For MSEngine Output
                             Check = on must set in the IOSTART.NCF file and not a NCF FILE...

                             EXAMPLE IOSTART.NCF FILE:

                                  NORST41
                                  SET Comprehensive MSEngine Synchronization Check = on 
                                  SET Primary Server Wait For MSEngine Output Check = on

                             EXAMPLE NORST41.NCF FILE:
                                  SET Secondary Server MSL Send Blocked Recovery Option = 0
                                  SET Primary Server MSL Send Blocked Recovery Option = 0
                                  SET MSEngine Abend And Processor Exception Recovery Option = 0
                                  SET IOEngine Abend And Processor Exception Recovery Option = 0
                                  SET Machine Check Recovery Option = 0
                                  SET Memory Parity Error Recovery Option = 0
                                  SET Secondary Server MSL Hardware Failure Recovery Option = 0
                                  SET Primary Server MSL Hardware Failure Recovery Option = 0
                                  SET MSEngine Outputs Different Recovery option = 1
                                  SET Secondary Server MSL Consistency Recovery Option = 0
                                  SET Primary Server MSL Consistency Recovery Option = 0
                                  SET Secondary Server MSL Deadlock Recovery Option = 0
                                  SET Primary Server MSL Deadlock Recovery Option = 0
                                  SET test mode = 0